I am running P4PE Rev. 1.03 withthe latest 1007. I still think a manual solution with a resistor and switch will work.

1. Rc410-m Rev 1.03 Drivers

. P4PE-X/TE User Guide. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

1. Buy the ASUS P4PE REV 1.03 from Direct.Parts after reviewing images and requesting a quote. Call us at +1 (972) 474-1342.
2. More Asus P4pe Rev 1 03 Manual Lawn images.

Chapter 2: BIOS information.2-1 2.1 Managing and updating your BIOS.2-2 2.1 Managing and updating your BIOS.2-2 2.1.1 Using ASUS EZ Flash to update the BIOS. 2-2 2.1.2 Using AFLASH to update the BIOS. Chapter 3: Software support.3-1 3.1 Install an operating system.3-2 3.2 Support CD information.3-2 3.2.1 Running the support CD.3-2 3.2.2 Drivers menu.3-3 3.2.3 Utilities menu.3-4 3.2.4 ASUS Contact Information.3-5. Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:. This device may not cause harmful interference, and.

This device must accept any interference received, including interference that may cause undesired operation. Safety information Electrical safety. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. ASUS Websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. The ASUS websites are listed in the ASUS Contact Information on page viii. Optional Documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. Technical Support Support Fax: +1-502-933-8713 General Support: +1-502-995-0883 Notebook Support: +1-510-739-3777 x5110 Support Email: tsd@asus.com ASUS COMPUTER GmbH (Germany and Austria) Address: Harkortstr.

25, 40880 Ratingen, BRD, Germany General Email: sales@asuscom.de (for marketing requests only) General Fax: +49-2102-9599-31 Web Site: www.asuscom.de. 3 x 184-pin DDR DIMM sockets for up to 2GB memory Supports PC3200./2700/2100/1600 unbuffered non-ECC DDR DIMMs (.Overclocked mode, a PC3200 DIMM requires a CPU with 800MHz FSB. Obtain PC3200 DDR DIMMs only from ASUS qualified vendors.) Expansion slots 1 x AGP 4X (1.5V only) 6 x PCI. P4PE-X/TE specifications summary BIOS features 2Mb Flash ROM, Award BIOS, TCAV, PnP, DMI2.0, SM BIOS2.3, ASUS C.P.R., ASUS EZ Flash, ASUS CrashFree BIOS2 Industry standard PCI 2.2, USB 2.0 Manageability WfM 2.0. DMI 2.0, WOL/WOR by PME, chassis intrusion, SMBus Form Factor ATX form factor: 12 in x 9.0 in (30.5 cm x 22.9 cm). Chapter 1 This chapter describes the features of the P4PE-X/TE motherboard.

It includes brief descriptions of the motherboard components, and illustrations of the layout, jumper settings, and connectors. Product introduction.

® Thank you for buying the ASUS P4PE-X/TE motherboard! The ASUS P4PE-X/TE motherboard delivers a host of new features and latest technologies making it another standout in the long line of ASUS quality motherboards! ® ® The motherboard incorporates the Intel.

ASUS C.P.R. (CPU Parameter Recall). ASUS EZ Flash BIOS With the ASUS EZ Flash, you can easily update the system BIOS even before loading the operating system. No need to use a DOS-based utility or boot from a floppy disk. Motherboard components Before you install the motherboard, learn about its major components and available features to facilitate the installation and future upgrades.

Refer to the succeeding pages for the component descriptions. Chapter 1: Product introduction. This LED acts as a reminder to turn off the system power before plugging or unplugging devices.

This chip performs multiple system functions that include hardware and system voltage monitoring, IRQ routing, among others. Super I/O controller. This Low Pin Count (LPC) interface provides the commonly used Super I/O functionality.

Audio CODEC. The ADI AD1888 is an AC’97 CODEC that allows 6-channel audio playback. The audio CODEC provides six DAC channels for 5.1 surround sound, S/PDIF output, AUX and Line In stereo inputs, integrated headphone amplifier, greater than 90dB dynamic range, and stereo Mic PREAMP support. ® PCI1 Intel I/O CR2032 3V Controller P4PE-X/TE Lithium Cell CMOS Power PCI2 (ICH4) CLRTC PCI3 AD1888 PCI4 SPDIF1 ASUS ASIC AUX1 with Hardware PCI5 Monitor SBPWR1 2Mbit Firmware PCI6 CHASSIS1 USB56 FPAUDIO1 PANEL1 GAME1 ASUS P4PE-X/TE motherboard user guide. Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. Unplug the power cord from the wall socket before touching any component.

Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. Place seven (7) screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so may damage the motherboard. Place this side towards the rear of the chassis ASUS P4PE-X/TE motherboard user guide. Central Processing Unit (CPU) 1.8.1 Overview The motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) ® ® socket. The socket is designed for the Intel Pentium 4 Processor in the 478-pin package with 512KB L2 cache on 0.13 micron process.

This processor supports 800./533/400MHz front side bus (FSB), and allows data transfer rates of 6.4GB/s, 4.2GB/s, and 3.2GB/s, respectively. Install a CPU heatsink and fan following the instructions that came with the heatsink package. Connect the CPU fan cable to the CPUFAN1 connector on the motherboard. ASUS P4PE-X/TE motherboard user guide 1-11. System memory The motherboard comes with three Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. These sockets support up to 2GB system memory using 184-pin unbuffered non-ECC PC3200./2700/2100/1600 DDR DIMMs.

The following figure illustrates the location of the DDR DIMM sockets. (. Overclocking mode If you wish to use a PC3200 (400MHz) DDR module, you need to install a CPU. Hynix HY5DU56822BT-D43 Hynix HYMD232646B8J-D43 AA Obtain DDR DIMMs only from ASUS qualified vendors to ensure system stability.

Visit the ASUS website (www.asus.com) for the latest qualified vendors list (QVL). 1.9.2 Installing a DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components.

1.10 Expansion slots The motherboard has six PCI slots and one Accelerated Graphics Port (AGP) slot. To install and configure an expansion card: 1. Install an expansion card following the instructions that came with the chassis. NOTE: The AGP slot supports only 1.5V AGP cards. You do not need to clear the RTC when the system hangs due to overclocking.

For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so BIOS can automatically reset parameter settings to default values.

ASUS P4PE-X/TE motherboard user guide 1-15. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 sleep mode (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug). FLOPPY1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. ® P4PE-X/TE PIN 1 P4PE-X/TE Floppy Disk Drive Connector ASUS P4PE-X/TE motherboard user guide 1-17. IDE connectors (40-1 pin PRIIDE, SECIDE) This connector supports the provided UltraDMA/100/66 IDE hard disk ribbon cable.

Connect the cable’s blue connector to the primary (recommended) or secondary IDE connector, then connect the gray connector to the UltraDMA/100/66 slave device (hard disk drive) and the black connector to the UltraDMA/100/66 master device. These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. CD1(Black) AUX1 (White) ® Left Audio Channel P4PE-X/TE Ground Ground Right Audio Channel P4PE-X/TE Internal Audio Connectors ASUS P4PE-X/TE motherboard user guide 1-19. CPU and chassis fan connectors (3-pin CPUFAN1, CHAFAN1) The fan connectors support cooling fans of 350mA740mA (8.88W max.) or a total of 1A2.22A (26.64W max.) at +12V.

Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. GAME/MIDI cable to this connector. The GAME/MIDI port on the module connects a joystick or a game pad for playing games, and MIDI devices for playing or editing audio files. The USB2.0/GAME module is purchased separately. GAME1 ® P4PE-X/TE P4PE-X/TE Game Connector ASUS P4PE-X/TE motherboard user guide 1-21. System panel connector (20-pin PANEL1) This connector accommodates several system front panel functions.

Speaker Keyboard Lock Connector Power LED ® P4PE-X/TE Reset SW ATX Power SMI Lead Switch. Requires an ATX power supply. P4PE-X/TE System Panel Connectors. System Power LED Lead (3-1 pin PLED) This 3-1 pin connector connects to the system power LED. Chapter 2 This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS information.

BIOS later. 2.1.1 Using ASUS EZ Flash to update the BIOS The ASUS EZ Flash feature allows you to easily update the BIOS without having to go through the long process of booting from a diskette and using a DOS-based utility. At the prompt, “Please Enter File Name for NEW BIOS: ”, type in the BIOS file name that you downloaded from the ASUS website, then press.

EZ Flash will automatically access drive A to look for the file name that you typed. 2.1.2 Using AFLASH to update the BIOS Creating a bootable disk AFLASH.EXE is a Flash Memory Writer utility that updates the BIOS by uploading a new BIOS file to the programmable flash ROM on the motherboard.

This file works only in DOS mode. To determine the BIOS version of your motherboard, check the last four numbers of the code displayed on the upper left-hand corner of your screen during bootup. BIOS revision will solve your problems. Careless updating may result to more problems with the motherboard!

Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS contact information on page viii for details) and save to the boot floppy disk you created earlier. BIOS file you saved to the boot disk.

If the Flash Memory Writer utility is not able to successfully update a complete BIOS file, the system may not boot. If this happens, call the ASUS service center for support. When the BIOS update process is complete, reboot the system. The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website (www.asus.com) to download the latest BIOS file. ASUS P4PE-X/TE motherboard user guide.

2.1.4 BIOS beep codes When you turn the power on and the system runs POST (Power On Self Tests), you will hear BIOS beeps. Refer to the following table for the meaning of the beeps. Award BIOS Beep Codes Beep Meaning One short beep when No error during POST. Use this menu to exit the current menu or to exit the Setup program. To access the menu bar items, press the right or left arrow key on the keyboard until the desired item is highlighted.

ASUS P4PE-X/TE motherboard user guide. 2.2.2 Legend bar At the bottom of the Setup screen is a legend bar. The keys in the legend bar allow you to navigate through the various setup menus. The following table lists the keys found in the legend bar with their corresponding functions. Navigation Key(s) Function Description. Valid values for month, day, and year are Month: (1 to 12), Day: (1 to 31), Year: (up to 2099). Use the or + keys to move between the month, day, and year fields.

ASUS P4PE-X/TE motherboard user guide 2-11. Legacy Diskette A 1.44M, 3.5 in. Sets the type of floppy drive installed. Configuration options: None 360K, 5.25 in. 1.2M, 5.25 in. 720K, 3.5 in. 1.44M, 3.5 in.

2.88M, 3.5 in. Floppy 3 Mode Support Disabled This is required to support older Japanese floppy drives. The Floppy 3 Mode feature allows reading and writing of 1.2MB (as opposed to 1.44MB) on a 3.5-inch diskette. User Type HDD Manually enter the number of cylinders, heads and sectors per track for the drive. Refer to the drive documentation or on the drive label for this information.

ASUS P4PE-X/TE motherboard user guide 2-13. After entering the IDE hard disk drive information into BIOS, use a disk utility, such as FDISK, to partition and format new IDE hard disk drives.

This is necessary so that you can write or read data from the hard disk. Make sure to set the partition of the Primary IDE hard disk drives to active.

IDE devices. Set to Disabled to suppress Ultra DMA capability. To make changes to this field, set the Type field to User Type HDD. Configuration options: 0 1 2 3 4 5 Disabled 2.3.2 Keyboard Features ASUS P4PE-X/TE motherboard user guide 2-15. Boot Up NumLock Status On This field enables users to activate the Number Lock function upon system boot. Configuration options: Off On Keyboard Auto-Repeat Rate 12/Sec This controls the speed at which the system registers repeated keystrokes.

Options range from 6 to 30 characters per second. Configuration options: 6/Sec 8/Sec 10/Sec 12/Sec 15/Sec 20/Sec 24/Sec 30/Sec Keyboard Auto-Repeat Delay 1/4 Sec This field sets the time interval for displaying the first and second characters. This item allows you to enable or disable the processor Hyper-Threading Technology. Configuration options: Disabled Enabled The item Hyper-Threading Technology appears only if you installed an Intel Pentium 4 CPU that supports this feature. ASUS P4PE-X/TE motherboard user guide 2-17. CPU Level 1 Cache, CPU Level 2 Cache Enabled These fields allow you to choose from the default Enabled or choose Disabled to turn on or off the CPU Level 1 and Level 2 built-in cache.

Rc410-m Rev 1.03 Drivers

Configuration options: Disabled Enabled BIOS Update Enabled This field functions as an update loader integrated into the BIOS to supply the processor with the required data. Configuration options: 3T 2T SDRAM Active Precharge Delay (value depends on SDRAM SPD) This item controls the number of DDR SDRAM clocks used for DDR SDRAM parameters. Configuration options: 8T 7T 6T 5T ASUS P4PE-X/TE motherboard user guide 2-19. System Performance Mode Auto This item allows you to enhance system performance when set to Turbo mode. If you encounter any problems with the Turbo setting, set to Optimal or Auto.

Configuration options: Auto Optimal Turbo SDRAM Idle Timer Auto Configuration options: Infinite 0T 8T 16T 64T Auto SDRAM Burst Length Auto Configuration options: Auto 4 8. This field allows you to set the address of the onboard parallel port connector. If you disable this field, the Parallel Port Mode and ECP DMA Select configurations are not available. Configuration options: Disabled 378H/IRQ7 278H/IRQ5 ASUS P4PE-X/TE motherboard user guide 2-21. Parallel Port Mode ECP+EPP This field allows you to set the operation mode of the parallel port. Normal allows normal-speed operation but in one direction only; EPP allows bidirectional parallel port operation; ECP allows the parallel port to operate in bidirectional DMA mode; ECP+EPP allows normal speed operation in a two-way mode.

Configuration options: Disabled Enabled Onboard LAN Boot ROM Disabled (appears on LAN models only) This field allows you to enable or disable the option ROM in the onboard LAN controller chipset. Configuration options: Disabled Enabled ASUS P4PE-X/TE motherboard user guide 2-23. PCI IRQ Resource Exclusion IRQ XX Reserved No/ICU These fields indicate whether or not the displayed IRQ for each field is being used by a legacy (non-PnP) ISA card. The setting No/ICU for an IRQ field indicates that you are using the ISA Configuration Utility (ICU), and that this particular IRQ is NOT required by a legacy ISA card. This field allows you to enable or disable the ACPI Suspend-to-RAM feature.

To support this feature, the +5VSB of the power supply should have the capacity to provide more than 720mA current. Configuration options: Disabled Enabled ASUS P4PE-X/TE motherboard user guide 2-25.

Suspend Mode Disabled Sets the time period before the system goes into suspend mode. Configuration options: Disabled 12 Min 23 Min 45 min 89 Min 20 Min 30 Min 40 Min 1 hour PWR Button.

I've been using my P4PE without problems for about 6 months now. I ordered a new SATA drive that just came in today and I'm having a lot of problems installing XP onto it. I have a few questions and observations for those that are successfully using this combination. I setup my system with just the SATA drive for the XP installation.

Do I need to create a RAID setup (using the auto option) if I just am using one drive? When I didn't create any RAID, and merely left the drive attached, during the XP setup (with the drivers for the controller) XP said it couldn't configure that drive and wouldn't let me select it for installation or partition creation. Is this normal?

When I did create a RAID array (but just one disk) via the Auto option in the controller setup, XP setup saw the drive and began an install as normal. However, upon finishing the first part of the install it rebooted the computer which was fine.

But then when it tried to go into the second part of the install, nothing happened. I had a blank screen the entire time. Manual resets resulted in the same problem.

So, do I have to setup a RAID with one SATA drive, and does anyone have any suggestions for my XP setup woes? Thanks, Brian. Thanks for the suggestions. It seems as though when the first part of the XP install is finished the machine reboots.

I get the Windows Logo and then where I should have gone into the continuation of the setup, my screen simply goes blank. After a couple hours of frustration, assuming it couldn't read the hard drive, I wondered if it simply wasn't showing the installation. Sure enough, the problem was that nothing was being put out from the video card! I have no idea why this might be the case.

I have installed XP with this video card many times. Maybe something about it and the SATA controller made it not work during the installation.

I plugged in an old PCI Matrox Millenium and was able to install XP fine. My Radeon VE worked great once XP was up and running. I have no idea what would cause this sort of behavior.

So if anyone's XP install goes blank, try swapping video cards. In reply to Brian Vallelunga -snip- I did what you want, but with an ATA 133 drive connected to the PRI-RAID1. You probably need to go into the BIOS and set the boot sequence. Set 'Other Boot Device' to 'SCSI Boot Device', and promote it ahead of 'IDE Hard Drive'. My boot seqence is set: 1. Removable Device Legacy Floppy 2. ATAPI CD-Rom 3.

Other Boot Device SCSI Boot Device 4. IDE Hard Drive I also have a Promise controler card installed in my system and in the Advanced PCI Configuration menu, 'Onboard ATA Device First' must be set to yes. Stephen Spark. Click to expand.I have a SATA drive connected to one SATA port, an ATA drive on the PRI-RAID 1 port, plus two HDD, a DVD and a CDRW on the IDE ports.

All works well, but I would like to separate the HDDs from the DVD & CD drives. I have a Promise ATA66 card (not installed). I would be interested in details of your setup to see if it is worth while trying my promise card. In particular, did you have to set up anything else in the BIOS, other than setting the Onboard ATA Device First.

Asus P4PE Rev 1.03 (no overclocking) 10061 BIOS 2.4 CPU (Standard Intel cooler) 2 x 512mb Apacer DDRAM W2k SP4 TIA Lionel Modra. In reply to Brian Vallelunga -snip- I did what you want, but with an ATA 133 drive connected to the PRI-RAID1.

You probably need to go into the BIOS and set the boot sequence. Set 'Other Boot Device' to 'SCSI Boot Device', and promote it ahead of 'IDE Hard Drive'. My boot seqence is set: 1. Removable Device Legacy Floppy 2.

ATAPI CD-Rom 3. Other Boot Device SCSI Boot Device 4. IDE Hard Drive I also have a Promise controler card installed in my system and in the Advanced PCI Configuration menu, 'Onboard ATA Device First' must be set to yes. Stephen Spark. Click to expand.I have a SATA drive connected to one SATA port, an ATA drive on the PRI-RAID 1 port, plus two HDD, a DVD and a CDRW on the IDE ports. All works well, but I would like to separate the HDDs from the DVD & CD drives.

I have a Promise ATA66 card (not installed). I would be interested in details of your setup to see if it is worth while trying my promise card. In particular, did you have to set up anything else in the BIOS, other than setting the Onboard ATA Device First.

Asus P4PE Rev 1.03 (no overclocking) 10061 BIOS 2.4 CPU (Standard Intel cooler) 2 x 512mb Apacer DDRAM W2k SP4 TIA Lionel Modra. Click to expand.Sorry for the late reply Lionel, I'm on the road all week and have no net access while at work. I have a similar setup as yours without the SATA drive.

Setting the 'Onboard ATA Device First' to yes was all I did other then changing the the 'Boot Sequence'. My system would hang when the Promise controller card was detecting it's drives. My system is setup has 3 hard drives and 2 optical drives with: P4PE motherboard: PRIRAID1 - C drive, the boot hard drive (setup as a 'single' drive raid array) PRIIDE - DVD drive SECIDE - CDR/CDRW drive Promise Ultra133 TX2: IDE1- D hard drive, data drive with mp3s, movies ect. IDE2- E hard drive, system backups and images All drives are masters on their own channels. Every thing is working great with no problems. Some time this winter, when I have some spare time I plan on setting up a dual boot system with WinXP and a Linux partition as well. I'll probably go with Mandrake again, but with all these drives, I may try a few other distro's as well 8^) Asus P4PE P4 2.4 @ 2.8g stock fan 512 mb PC 3200 @ 416 MHz WinXP She'll clock higher but it's hot and I don't have AC, so I'll leave it on some conservative settings till winter comes.

Stephen Spark.