1. National Rules For Electrical Installations

. ETCI achieves its objective of promoting electrical safety in electrical equipment and installations and encouraging an awareness of electrical safety among the general public through its publications. This is achieved through the preparation and publication of National Wiring Rules for Electrical Installations and of guides to their effective implementation in practice. It is also achieved through the publication of brochures on precautions for the safe use of electrical equipment and appliances, for the benefit of the general public and of particular communities within it, such as those engaged in agriculture.

NATIONAL RULES FOR ELECTRICAL INSTALLATIONS. Socket-outlets providing dedicated connection for specific electrical appliances or equipment. NATIONAL RULES FOR ELECTRICAL INSTALLATIONS Fourth Edition ET 101. An installation is defined as one requiring a comp letion certificate in accordance with the.

Also Available Free of Charge: ET101:2008, Fourth Edition ETCI has issued an Amendments, Corrigenda and Errata list to ET101:2008, Fourth Edition. ET206A This publication is available as an A3 wall chart and can be included in your organisation's safety file. The chart is an extract from the ETCI Good Practice Guide on the Management of Electrical Safety at Work and is intended to assist the electrical expert in drawing up a job description to safely carry out live or dead working on an electrical installation or electrical apparatus in accordance with the Safety, Health and Welfare at Work (General Application) Regulations 2007, S.I. 299 of 2007 (Part 3 - Electricity). ET214 This Guide is intended to provide specifiers, installers and users of RCDs with a better understanding of the application, selection and use of such products. This publication is intended for use as a guide only, and has no regulatory or statutory status and should therefore be used in conjunction with the current issue of the National Rules for Electrical Installations (ET101), relevant product standards, and I.S. EN60439 - Low Voltage Switchgear and Control Gear Assemblies, where applicable.

The Guide is limited to RCDs intended for domestic and similar use, having a rated voltage not exceeding 400V AC and a rated current not exceeding 125A. ET215 Since November 2007 statutory requirements are in place with regard to the maintenance, inspection and testing of portable equipment used in the workplace. This Guide is intended to help employers meet their statutory duties in this regard.

ET218 This Guide is intended to raise awareness of electricity in the medical workplace. It gives an overview of electricity and its use in the medical workplace setting. Electricity can be useful for certain medical interventions, particularly when applied in small, controlled amounts. However it can also be hazardous at unsafe levels of exposure. The Guide discusses electricity as it affects the human body, referring to beneficial aspects as well as not so beneficial aspects.

We explore electricity and its usage in the medical workplace, and look at important aspects of electrical equipment in medical practice, including mains and battery powered equipment. Some tips and guidelines for users of electrical equipment in medical practice are offered. Who should read this booklet?

National Rules For Electrical Installations

If you are a nurse, allied health professional, doctor, or a consultant, you should find this booklet useful and informative. Remember, the aim of this booklet is to highlight important messages about electricity in the medical workplace, and in particular: - the need to be careful in general when using electrical equipment in medical practice, and when connecting equipment to the electrical supply; - in patient areas, and in particular in cardiac protected areas, additional measures need to be observed. Users of electrical equipment in medical practice need to be more aware of the effects of electricity when treating patients in these areas. This publication was first introduced in March 2010. Guideline on Managing Safety in the Use of Portable Electrical Equipment in the Workplace (ISSA (Electricity Section) Publication). The ISSA Electricity Section has published this Guideline which describes safe practices that should be followed by those involved with portable electrical equipment. The Guideline is not designed as a training manual, but contains information, best practices and general recommendations deemed appropriate for the safe use of portable electrical equipment.

To download this publication. ETCI Offices, Unit H12, Centrepoint Business Park, Oak Road, Dublin 12, Ireland Tel:+353-1-4290088 Fax:+353-1-4290090 Email: © 2015 Web: ETCITC6.

National Rules for Electrical Installations: (Reference to Chapters, Sections, Paragraphs, Tables and Annexes correspond to those contained in the National Rules for Electrical Installations, Fourth Edition ET101:2008. This summary of the Rules, based on the Fourth Edition, lays down the requirements for the design, erection and proper functioning of electrical installations so as to ensure safety of persons, livestock and property against dangers and damage that may arise in the reasonable use of electrical installations. Please Note: ETCI issued an Amendments, Corrigenda and Errata list to ET101:2008, Fourth Edition, referenced 06/2009, on. (.pdf 214kB). ETCI has also issued other notices on the National Rules.

To see a listing of these notices. Scope: These Rules apply to electrical circuits supplied at nominal voltages up to and including 1000V a.c. Or 1500V d.c. Which form part of installations in residential, commercial, industrial or public premises, or of installations contained in prefabricated buildings, caravans and halting sites, as well as installations for specialised purposes, such as those in agricultural and horticultural holdings. They do not apply to electrical equipment for traction in automobiles or aircraft or on board ships, to installations in mines and quarries, systems for distribution of electrical energy to the public, power generation or transmission for such systems, radio interference suppression equipment or lightning protection of buildings. The ETCI, as the Irish National Committee of CENELEC, the European Committee for Electrotechnical Standardisation, participates in the work of harmonising the rules for electrical installations which must be implemented by all countries concerned. More than half of the technical content of the Rules is now harmonised throughout the CENELEC region.

The format of the Rules is the same as that adopted by most European countries. The Rules comprise seven distinct parts: Part 1: Scope, Object and Fundamental Principles. Part 2: Definitions. Part 3: General Characteristics. Part 4: Protection for Safety. Part 5: Selection and Erection of Equipment.

Part 6: Verification and Certification. Part 7: Requirements for Special Installations or Locations. Part 4 contains the fundamentals of safety for installations. These include measures for protection against shock, earthing, thermal effects generated by installations, short-circuits, overloads, fire and earth faults.

Part 5 contains the practical requirements for design and construction of installations. These include comprehensive rules for wiring systems and a substantial set of tables giving current ratings for various types of cables in differing situations. Earthing and bonding are covered.

Part 6 specifies the tests that must be carried out on the completed installation in order to verify compliance. Part 7 contains rules for special situations - bathrooms, swimming pools, saunas, farms, earthing of IT equipment, caravans and caravan parks. Notices Issued by ETCI on the National Rules: Fundamental Principles for Safety of Electrical Installations: These Rules are intended to protect persons, livestock and property against risks arising from the reasonable use of electrical installations, particularly against shock currents and excessive temperatures likely to cause fires, burns and other injurious effects, including risks of physical injury from electrically-driven mechanical equipment. See also the ESB Safety Pages:. ETCI Offices, Unit H12, Centrepoint Business Park, Oak Road, Dublin 12, Ireland Tel:+353-1-4290088 Fax:+353-1-4290090 Email: © 2013 Web: ETCITC6 Site hosted.